The xenon lamp aging test chamber utilizes a xenon arc lamp capable of simulating the full sunlight spectrum to reproduce the damaging wavelengths present in different environments. It provides the necessary environmental simulation and accelerated testing for scientific research, product development, and quality control.
The xenon lamp aging test chamber, which employs a xenon arc lamp that simulates the full sunlight spectrum, is used to recreate the destructive wavelengths that exist in various environments:
It provides the required environmental conditions for scientific research, product development, and quality control through simulation and accelerated aging tests.
It is used for selecting new materials, improving existing materials, or evaluating the durability changes in materials after composition alterations.
The test chamber can effectively simulate the changes materials undergo when exposed to sunlight under different environmental conditions.
Compact Testing: For small or limited test samples, a benchtop xenon lamp can be used to achieve similar results.
Light irradiance refers to the rate of light energy per unit area on a surface. The xenon lamp aging test chamber must control the intensity of light irradiance to achieve accelerated testing and reproducible results. Variations in light irradiance can affect the rate of material degradation, while changes in wavelength (e.g., the spectral energy distribution) can influence the speed and type of material degradation.
The xenon lamp tube and other components generate xenon gas, and the chamber’s spray system administers water. During dry periods, the temperature must remain constant. If the thermometer cannot maintain the specified temperature, the maximum temperature reached during the dry period should be documented in the test report. Even when the exposure apparatus operates alternately, the black standard thermometer should measure temperature continuously. If a black panel thermometer is used, the type of thermometer, placement method, and chosen working temperature should be noted in the test report.
The solar eye allows for the selection of appropriate light irradiance during testing, including irradiance levels equivalent to midday sunlight in summer. The solar eye continuously monitors light irradiance within the test chamber and can adjust the lamp's power to maintain the irradiance at the set working value. Over time, as the irradiance drops below the set value, the lamp tube must be replaced to ensure normal irradiance levels are maintained.
By employing these principles and capabilities, the xenon lamp aging test chamber provides accurate and reliable simulation of environmental conditions for evaluating the durability and performance of materials and products.
English
русский
français
العربية
Deutsch
Español
