The UL 50E shower is designed and manufactured according to the UL50E standard, which is used to test the protection performance of electrical equipment enclosures.
By simulating the natural rainfall environment, the waterproof performance and sealing performance of the product under the rain condition are tested to ensure that the product can resist the erosion of rain in actual use.
Model: R-UL020
Standard: UL 50E
1. Designed and manufactured in strict accordance with UL50E standards, it can accurately simulate various prescribed rain scenarios and conditions to ensure the authority and credibility of test results.
2. Accurately control the flow and pressure of the water spray, the water supply pressure is stable at about 34.5 kpa, and can be fine-tuned according to different test requirements, such as light rain, moderate rain, heavy rain, etc.
3. With 4 nozzles, of which there are 3 on the top and 1 on the bottom. The nozzle spacing is 71 cm. The spray angle is 45°, which can ensure the uniformity and coverage of the spray and avoid the test dead angle.
4. The UL 50E shower is made of high-quality SUS 304 stainless steel, which has good corrosion resistance and robustness. The structure design is simple, the components are easy to disassemble and install, convenient for daily maintenance.
Model | R-UL020 | |
Overall Dimensions (mm) | 800*1500*3800mm | |
Height adjustment range of spray device | 1000-3600mm(Adjustable) | |
Parameter | Number of spray head | 3 spray heads |
Nozzle spacing | 710mm | |
Spraying Hole Diameter | Φ5mm | |
Water pressure | 34.5Kpa | |
Sample platform size | 1000X1400X500mm | |
Load of sample platform load | 100 Kgs | |
Structure | Water Pressure Control | Flow meter |
Water supply system | Automatic water supply, Water purification system | |
Control Box | Display the Spray Mode, Time and Water Pump | |
Material | Material | SUS304 stainless steel |
Sample platform Material | SUS304 stainless steel | |
Environmental Conditional | 5℃～+35 ℃ ≤85% RH | |
Standard | UL 50E Type 3R | |
Power supply | 380V 50Hz 3P | |
① Nozzle | Four nozzle, the top three, one at the bottom. The nozzle is made of stainless steel, which can withstand long-term water impact and is not easy to rust and clog. |
② Water pressure guage, control valve | Accurately control the flow and pressure of water spray to meet different test requirements. |
③ Regulating handle | Through manual stainless steel wheel device can freely, is convenient to adjust the position of the spray and angle. |
④ Sample platform | Place the sample being tested, made of SUS 304 stainless steel. |
⑤ Controller | PLC controller can be precisely set and control the parameters of the test, such as the test of time and the frequency of the water, water flow and pressure, etc. |
